Proxmox VE & Virtualisation

Server virtualisation for small and medium-sized businesses. With Proxmox VE, we implement flexible and reliable server solutions – from a single virtualisation server to redundant clusters with tailored backup and disaster recovery concepts. Proxmox VE server virtualisation reduces both risk and administrative overhead, even with a single server.

Benefits

With server virtualisation, multiple operating systems can run simultaneously on a single server and be conveniently managed through the Proxmox VE web interface. Virtual disks are stored as files, making them easy to back up and restore when required. Virtual servers can also be installed and managed entirely remotely. The virtualisation environment provides full server management without the need to be physically on site.

Proxmox VE Web Interface

Our Server Virtualisation Platform

As a conservative IT service provider focused on small and medium-sized businesses, we have relied on KVM under Linux for many years, using the open-source virtualisation platform Proxmox VE. Its key advantages are flexibility and the freedom to choose hardware independently. We offer cost-effective single-server solutions as well as redundant server environments and clusters using storage solutions such as Ceph or GlusterFS. Based on our experience, alternatives such as Hyper-V (Microsoft) or vSphere (VMware) are often unnecessarily complex and resource-intensive for server virtualisation in SMEs.

Available Server Configurations

1

Single Server

With RAID and our own monitoring. Backups are stored on a NAS and optionally on external USB drives.
2

Two Servers

One server remains in operation while the second server is kept powered off. If the primary server fails, its data drives can be transferred to the second server using removable drive bays. This is the configuration most commonly used by our customers.
3

Three Servers

A high-availability (HA) cluster is possible with three servers. If one server fails, another server automatically takes over its function, so no manual intervention is required.

Emergency Server

Our emergency server can fully replace the primary server within a very short time in the event of a failure. The servers operate independently and can use different hardware configurations. This makes the emergency server more cost-effective, as less powerful components can be used. Our scripts automatically adjust the virtual servers to the available resources before starting them. Even external USB devices, such as software licence dongles or serial adapters, can be used immediately on the emergency server without additional configuration. A single emergency server can provide backup capacity for one or more primary servers. This concept allows us to offer even small businesses an affordable and highly reliable failover solution.

Hardware

We use standard components from well-known manufacturers, but also offer complete HP ProLiant systems, both used and new. Each server is configured to meet your individual requirements, making it easy to replace or upgrade components even after several years. We select manufacturers based on our experience with the reliability of their components. For example, we use be quiet! power supplies, Seagate hard drives and Samsung SSDs for servers, as well as WD hard drives for storage solutions. For storage systems, we use QNAP and Synology, and OpenMediaVault for customised solutions and higher-performance requirements. Of course, both our standard configurations and the entire hardware setup can be adapted to your specific requirements.

Datensicherung

Backups are performed and monitored using our own scripts. Virtual servers can be backed up offline during the night or suspended to minimise downtime. As the initial backup is always performed locally, service interruptions are kept to a minimum. With offline backups, the operating system used on the server is irrelevant. Once the backup is complete, the data can be transferred to a USB drive, NAS system or the cloud. All three backup destinations can also be used in combination, with retention periods configured according to your requirements.

Long-Term Use

We do not replace servers, workstations or other IT systems according to fixed replacement cycles, but only when it makes technical or economic sense.
One example is a server we installed for a customer in May 2013 that remains in reliable operation today. Among other tasks, it provides file sharing and runs the inventory management system for an electrical company with three workstations.

Even after many years, the system continues to meet the company’s requirements. Its performance remains sufficient for its intended purpose, while an appropriate backup and replacement strategy provides protection in the event of individual component failures.

The server is built using standard components from well-known manufacturers. Individual components can therefore be replaced or upgraded as required. We do not consider replacing an entire system simply because it has reached a certain age to be necessary.